Cable Lubricant Tips | Reduce Friction by 95% | Retools

  ↵
Lubricants
 
One of the most underestimated accessories is cable lubricant. Especially when pulling cables through long or narrow conduit systems, friction is the main enemy – it increases the required pulling force, stresses cable jackets, and can overwhelm even powerful pulling systems.
 
Lubricant provides a remedy by reducing the coefficient of friction between the cable jacket and the conduit wall or between the conduit and the pulling tape. This allows the cable to move more easily and with more control, increases the service life of the cables, and puts less stress on your cable pulling system.
 
In the past, milking grease or even dish soap were used, which then stuck inside the conduits. Modern cable lubricants for house installations consist of water-based GEL, spray, or foam.
 Advantages of the individual lubricants 
 
  • No staining, therefore suitable for new buildings; white walls stay white 
  • Adheres to the cable  
  • Universal and inexpensive for all cable pulling applications
  • The spray mist penetrates deep into the pipe.  
  • Does not drip down along the cable, as it is sprayed into the pipe 
  • Colorless and odorless 
  • Non-sticky and does not dry out 
  • Adheres very well to the cable, so the foam is pulled into the pipe 
  • Ideal for overhead applications 
  • Does not drip down along the cable, as it is applied at the pipe entrance 
  • Water-soluble  
Detailed facts about our cable lubricants
Temperature resistant up to 85 °C, silicone-free, and water-soluble – this gel significantly reduces frictional resistance and protects cables from damage. Removable without residue, skin-friendly, biodegradable, and non-flammable. Ideal for pulling over long distances or in complex conduit systems – top price-performance ratio for network construction.
Non-flammable, colorless, and odorless – the spray reduces frictional resistance during pulling by up to 40%. The foldable special nozzle enables large-area or precise spraying, evenly distributing silicone-based lubricants. Long-lasting, non-sticky, and does not dry out – perfect for electrical lines in pipes and shafts.
Clean, drip-free, ideal for overhead work: Foam lubricant is silicone-based, reduces friction by up to 40%, is VOC-free, and non-flammable. Special attachment for precise or large-area application, water-soluble and long-lasting – the first choice for professionals in network construction.