CB 260 brake pad, 6 pieces, special plastic prevents uncontrolled unwinding

CB 260 brake pad, 6 pieces, special plastic prevents uncontrolled unwinding

5.80 CHF

CB 260 brake pad, 6 pieces, special plastic prevents uncontrolled unwinding

5.80 CHFThe brake pad of the CB 260 overrun brake is a specially developed wear part that is responsible for the controlled braking of the cable reel. Due to constant friction during use, this element wears out over time and must be replaced when wear is noticeable. Replacement can be carried out without dismantling the overrun brake: use a narrow flat-head screwdriver to gently lift the insert, move it in the direction of the arrow and replace it. This restores the optimum braking effect of the CB 260 Cable Box. The robust special plastic is designed for heavy-duty use and ensures that the unwinding speed is reduced and the reel is fixed in place during transport. Scope of supply: 6 x Brake pads CB 260
CB 260 trolley, accessories for CB 260 cable box, 1 x left and right side panel each,

CB 260 trolley, accessories for CB 260 cable box, 1 x left and right side panel each,

108.00 CHF

CB 260 trolley, accessories for CB 260 cable box, 1 x left and right side panel each,

108.00 CHF
The CB260 trolley consists of a left and a right section with wheels, which can be attached to either side of a CB 260 box and secured using locking levers. With a stack height of four or more CB 260 boxes, this creates a fully functional trolley. The two-part wheels can also be mounted on two, three or four stacks placed next to each other.
The maximum load capacity is 150 kg when used on level ground (static). When transporting over stairs or steps, the transport load is limited to 50 kg (dynamic).
Static: smooth movement on level ground
Dynamic: when additional forces are applied – for example, when going up and down stairs. 
Fold-out front supports are integrated into both wheels. These support stability with taller stacks (top-heavy) and prevent the CB 260 boxes from tipping forward. 
In addition, brief assembly instructions and a video are available, showing the assembly process step by step.
Area of application: Transport tasks in everyday work, transport on stairs and applications in warehouse environments such as cable or material storage.
Application film: A short, informative application film is available at www.runpotec.com
Cable guide clip CB 260 Accessories for CB 260 Cable Box

Cable guide clip CB 260 Accessories for CB 260 Cable Box

5.50 CHF

Cable guide clip CB 260 Accessories for CB 260 Cable Box

5.50 CHF
The cable guide clip CB 260 is an accessory for the CB 260 Cable Box and is attached to it. This clip enables the controlled unwinding of individual wires, wires or cables without annoying cable tangles.

The cable guide clip is fixed to the right side of the CB 260 Cable Box and thus determines the unwinding direction. This ensures that the cables can be unwound evenly and without tangling. This saves time and ensures a smooth workflow. In addition, the cable guide clip prevents the roll of the CB 260 single-wire unwinding system from accidentally falling out.
 
CB 260 overrun brake, 1 x overrun brake + 2 x brake pads, special plastic

CB 260 overrun brake, 1 x overrun brake + 2 x brake pads, special plastic

5.90 CHF

CB 260 overrun brake, 1 x overrun brake + 2 x brake pads, special plastic

5.90 CHFThe CB 260 overrun brake is used to control the braking of the cable reel and prevents uncontrolled unwinding of cables or individual wires – both during use and transport. The brake is activated by pressing and moving it to the right. In this state, the reel filled with cable or individual wires is reliably braked and the unwinding speed is reduced. To deactivate, simply press and move to the left, allowing the reel to run freely again. The red brake pad works with a contact pressure function, is designed as a wear part and can be easily replaced if necessary. A second red replacement insert is included in the scope of delivery. Replacement can be carried out without dismantling the overrun brake: use a narrow flat-head screwdriver to gently lift the insert, move it in the direction of the arrow and remove it. Scope of supply: 1 x CB260 overrun brake, 2 x brake pads
Roll CB 260 - without box Accessories for CB 260 Cable Box

Roll CB 260 - without box Accessories for CB 260 Cable Box

44.80 CHF

Roll CB 260 - without box Accessories for CB 260 Cable Box

44.80 CHF
The CB 260 roll is the perfect accessory for the CB 260 Cable Box and offers an ideal solution for the neat and space-saving storage of single cores, wires and cables that fit into the bundle size - max. 26 cm outer diameter. The practical rolls are stackable, which enables efficient storage and saves valuable space. The roll is particularly useful when one of the cable spools in the CB 260 Cable Box has been used up. The rolls can be easily changed using the red push button.
 
Compared to conventional plastic or cardboard packaging, the CB 260 roll offers a clean and durable solution. The cables are well protected and at the same time neatly stowed away. Another highlight of the roll is the simple and quick changing of the cables or single cores. The roll can be opened and closed quickly with a twist, which makes changing the cable bundle much easier and also saves time. The CB 260 roll combines functionality, comfort and cleanliness, making it an indispensable accessory for any well-organized workshop or work environment.
CB 260 wall bracket Accessories for CB 260 Cable Box

CB 260 wall bracket Accessories for CB 260 Cable Box

6.50 CHF

CB 260 wall bracket Accessories for CB 260 Cable Box

6.50 CHF
The CB 260 wall bracket is a practical accessory for the CB 260 Cable Box (single wire unwinding system), which offers versatile options for efficient cable storage. The wall bracket rails allow the boxes to be stacked off the floor, saving valuable space. Large cable management shelves can be fixed or secured using the wall bracket rails.
 
The wall bracket is made of robust stainless steel and is used to hold and fix them to walls or in vehicles. The CB 260 Cable Boxes can be easily hung in the wall bracket. Each bracket rail is designed to carry up to 5 boxes vertically, which corresponds to a total load of approx. 25 kg.
 
For a larger capacity, the rails can be mounted next to each other, the distance required for mounting is already specified in the wall bracket rails (see assembly instructions).
 
This wall bracket is the ideal solution for securing and fixing the CB 260 Cable Boxes for neat and efficient cable management.