2 components special glue 24 ml, 2-component

2 components special glue 24 ml, 2-component

25.80 CHF

2 components special glue 24 ml, 2-component

25.80 CHFOperational area: 2 K - Special adhesive 24 ml for repairing 6 mm, 7 mm, 11 mm and 15 mm fiberglass rods. 20% more adhesive strength compared to superglue. The 2-component special adhesive is transparent and offers very high resistance. For instructions see safety data sheet! Scope of supply: 1 x 2 components special glue 24 ml
Roll-off rails AS 900 - cable drum unwinder, Length: 900 mm/35,4331 in., set of 2, stainless

Roll-off rails AS 900 - cable drum unwinder, Length: 900 mm/35,4331 in., set of 2, stainless

999.90 CHF

Roll-off rails AS 900 - cable drum unwinder, Length: 900 mm/35,4331 in., set of 2, stainless

999.90 CHFThe AS 900 unwinding rails are designed for safe unwinding of heavy cable material and cable drums from 450 mm to 2000 mm diameter. One of the two heavy duty rollers can be positioned in 3 different settings. The stable stainless steel-aluminium construction with high-quality, maintenance-free, ball bearing heavy-duty support rollers ensure a long service life. Easy and quick change of drums due to the unwinding brake. Due to their two-part narrow design they are easy to use in cramped spaces. Especially recommended where different cable types are to be processed side by side within a short time. Max. drum wight 1700 kg (wooden drum). Since some of the drums are in very poor condition, the recommended working load bearing capacity of 800 kg should not be exceeded. Optimal field of application: cable drums from 450 mm - 2000 mm diameter Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 2 x Roll-off rails AS 900
Adapter with quick release fastener with thread RTG Ø 6 mm

Adapter with quick release fastener with thread RTG Ø 6 mm

29.90 CHF

Adapter with quick release fastener with thread RTG Ø 6 mm

29.90 CHF
The patented adapter quick-release fastener has an integrated twist compensator which compensates for the twisting of the cable in the tube and thus protects the slide-in system, the pulling sleeve and the cable enormously. The quick-release fastener, an ergonomically shaped hook, allows the unit to be attached and pulled in within seconds and there is no longer any need for time-consuming screwing and unscrewing. The total breaking load of 200 kg has been tested on the hooks and connections. The hook is made of high quality stainless steel, therefore no rusting and long life.
Optimal application: For connecting RUNPOTEC cable pulling grips with RTG Ø 6 mm thread to all RG guiding heads (RUNPOGLIDER).
Starting head Ø 11 mm/0,4331 in. with thread RTG Ø 6 mm, stainless

Starting head Ø 11 mm/0,4331 in. with thread RTG Ø 6 mm, stainless

4.70 CHF

Starting head Ø 11 mm/0,4331 in. with thread RTG Ø 6 mm, stainless

4.70 CHF1 x starting bulb Ø 11 mm made of stainless steel for glass fibre rod Ø 3 mm, thread RTG Ø 6 mm. Stainless steel Application film: you can watch a short, very informative application film by scanning the QR code or at www.runpotec.com. Scope of supply: 1 x starting bulb Ø 11 mm with thread RTG Ø 6 mm, stainless steel
Starting head Ø 20 mm/0,7874 in. with thread RTG Ø 12 mm, stainless

Starting head Ø 20 mm/0,7874 in. with thread RTG Ø 12 mm, stainless

28.30 CHF

Starting head Ø 20 mm/0,7874 in. with thread RTG Ø 12 mm, stainless

28.30 CHFStarting head Ø 20 mm made of stainless steel for fiberglass rod Ø 7.5 mm, 9 mm, 11 mm, 15 mm - RTG Ø 12 mm thread. The starting head has an additional transition thread to RTG Ø 6 mm to adapt various guide rods (RUNPOSTICKS), guide probes, cable pulling grip (sock) etc. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Starting head Ø 20 mm with thread RTG Ø 12 mm, 1x connection thread RTG Ø 6 mm
Starting head Ø 30 mm/1,1811 in. with thread RTG Ø 12 mm, stainless

Starting head Ø 30 mm/1,1811 in. with thread RTG Ø 12 mm, stainless

30.80 CHF

Starting head Ø 30 mm/1,1811 in. with thread RTG Ø 12 mm, stainless

30.80 CHFStarting head Ø 30 mm made of stainless steel for fiberglass rod Ø 7.5 mm, 9 mm, 11 mm, 15 mm - RTG Ø 12 mm thread. The starting head has an additional transition thread to RTG Ø 6 mm to adapt various guide rods (RUNPOSTICKS), guide probes, cable pulling grip (sock) etc. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Starting head Ø 30 mm with thread RTG Ø 12 mm, 1x connection thread RTG Ø 6 mm
Storage bag for RUNPOSTICKS incl. shoulder

Storage bag for RUNPOSTICKS incl. shoulder

26.80 CHF

Storage bag for RUNPOSTICKS incl. shoulder

26.80 CHFThe RUNPOSTICKS and all accessories can be perfectly stored in the practical storage bag with carrying strap and large storage compartment. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Storage bag empty - (for RUNPOSTICKS)
Attachment flexible 12 cm/4,7244 in. - thread RTG Ø 6 mm, stainless

Attachment flexible 12 cm/4,7244 in. - thread RTG Ø 6 mm, stainless

9.90 CHF

Attachment flexible 12 cm/4,7244 in. - thread RTG Ø 6 mm, stainless

9.90 CHFApplication: mainly used in combination with the RUNPOCAM RC2 multifunctional camera to create individual angles or bends. This makes it possible to make various angle settings even over long distances (see Application video RUNPOCAM RC2). Also ideally suited for the RUNPOSTICKS. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Attachment flexible 12 cm with RTG Ø 6 mm thread
Multifunction mandrel - attachment for X BOARD XB 300 und XB 500, special plastic, Ø 72 mm/2,8346

Multifunction mandrel - attachment for X BOARD XB 300 und XB 500, special plastic, Ø 72 mm/2,8346

67.00 CHF

Multifunction mandrel - attachment for X BOARD XB 300 und XB 500, special plastic, Ø 72 mm/2,8346

67.00 CHFThe multifunction mandrel has been specially developed for the X BOARD XB 300 and XB 500 cable rolling systems. Loose cable bundles can also be rolled by attaching them to the stainless steel centre mandrel of the XB 300 and then folding out the 4 side brackets. The telescopic centre mandrel measures 72 mm in diameter. It is therefore also ideal for rolling a thinner cable bundle with a small inner diameter or individual wires. The normal height of the multifunction mandrel is 196 mm, which can be extended up to max. 294 mm via the telescopic mechanism. This means high cable bundles or corresponding tube bundles can also be rolled. When the 4 side brackets are unfolded, there is a total contact surface of 430 mm in diameter. Ideally, this should correspond to the respective cable or tube bundle. A designated opening allows the unit to be combined with the RUNPOSTICKS. Optimum area of application: rolling of loose cable bundles or individual wires up to a max. height of 294 mm and a max. diameter of 430 mm Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Multifunction mandrel

<< < 1 2 3 ... > >>