Adapter with quick release fastener with thread RTG Ø 6 mm

Adapter with quick release fastener with thread RTG Ø 6 mm

29.90 CHF

Adapter with quick release fastener with thread RTG Ø 6 mm

29.90 CHF
The patented adapter quick-release fastener has an integrated twist compensator which compensates for the twisting of the cable in the tube and thus protects the slide-in system, the pulling sleeve and the cable enormously. The quick-release fastener, an ergonomically shaped hook, allows the unit to be attached and pulled in within seconds and there is no longer any need for time-consuming screwing and unscrewing. The total breaking load of 200 kg has been tested on the hooks and connections. The hook is made of high quality stainless steel, therefore no rusting and long life.
Optimal application: For connecting RUNPOTEC cable pulling grips with RTG Ø 6 mm thread to all RG guiding heads (RUNPOGLIDER).
Cable pulling grip Ø 10 - 15 mm/0,3937 - 0,5906 in. with loop CW, double-steel weave length: 600

Cable pulling grip Ø 10 - 15 mm/0,3937 - 0,5906 in. with loop CW, double-steel weave length: 600

49.20 CHF

Cable pulling grip Ø 10 - 15 mm/0,3937 - 0,5906 in. with loop CW, double-steel weave length: 600

49.20 CHFCable pulling grip (sock) with loop. Made of flexible, robust and CDP coated double steel mesh. The re-braided cable pulling grip (sock) end offers a higher standard of safety. The cable pulling grip (sock) series with loop is perfectly suited in combination with the RUNPOTEC pulling ropes and the cable pulling winch CW 800 E. RUNPOTEC recommends using the specially developed connecting swivel made of high-quality stainless steel for permanent tension. Highest quality materials with a long service life! Scope of supply: 1 x Cable pulling grip Ø 10 - 15 mm with loop CW
Cable pulling grip Ø 15 - 19 mm/ 0,5906 - 0,7480 in. with loop and thread RTG Ø 6 mm, stainless

Cable pulling grip Ø 15 - 19 mm/ 0,5906 - 0,7480 in. with loop and thread RTG Ø 6 mm, stainless

51.20 CHF

Cable pulling grip Ø 15 - 19 mm/ 0,5906 - 0,7480 in. with loop and thread RTG Ø 6 mm, stainless

51.20 CHFCable pulling grip (sock) with loop and RUNPOTEC RTG Ø 6 mm thread including swivel. Made of flexible stainless steel wire mesh. The built-in swivel allows the cable to turn in the pipe, thus preventing the thread from unscrewing. Could also be looped in. Highest quality materials with a long service life! Compatible with POWER REX, RUNPOSTICKS and fiberglass rods Ø 4.5 / 6 / 7.5 / 9 and 11 mm. Scope of supply: 1 x Cable pulling grip Ø 15 - 19 mm with loop and thread RTG Ø 6 mm, incl. swivel
Cable pulling grip Ø 15 - 20 mm/0,5906 - 0,7874 in. with loop CW, double-steel weave length: 600

Cable pulling grip Ø 15 - 20 mm/0,5906 - 0,7874 in. with loop CW, double-steel weave length: 600

51.80 CHF

Cable pulling grip Ø 15 - 20 mm/0,5906 - 0,7874 in. with loop CW, double-steel weave length: 600

51.80 CHFCable pulling grip (sock) with loop. Made of flexible, robust and CDP coated double steel mesh. The re-braided cable pulling grip (sock) end offers a higher standard of safety. The cable pulling grip (sock) series with loop is perfectly suited in combination with the RUNPOTEC pulling ropes and the cable pulling winch CW 800 E. RUNPOTEC recommends using the specially developed connecting swivel made of high-quality stainless steel for permanent tension. Highest quality materials with a long service life! Scope of supply: 1 x Cable pulling grip Ø 15 - 20 mm with loop CW
Cable pulling grip Ø 19 - 25 mm/ 0,7480 - 0,9843 in. with loop and thread RTG Ø 6 mm, stainless

Cable pulling grip Ø 19 - 25 mm/ 0,7480 - 0,9843 in. with loop and thread RTG Ø 6 mm, stainless

52.50 CHF

Cable pulling grip Ø 19 - 25 mm/ 0,7480 - 0,9843 in. with loop and thread RTG Ø 6 mm, stainless

52.50 CHFCable pulling grip (sock) with loop and RUNPOTEC RTG Ø 6 mm thread including swivel. Made of flexible stainless steel wire mesh. The built-in swivel allows the cable to turn in the pipe, thus preventing the thread from unscrewing.Could also be looped in. Highest quality materials with a long service life! Compatible with POWER REX, RUNPOSTICKS and fiberglass rods Ø 4.5 / 6 / 7.5 / 9 and 11 mm. Scope of supply: 1 x Cable pulling grip Ø 19 - 25 mm with loop and thread RTG Ø 6 mm, incl. swivel
Cable pulling grip Ø 20 - 25 mm/0,7874 - 0,9843 in. with loop CW, double-steel weave length: 600

Cable pulling grip Ø 20 - 25 mm/0,7874 - 0,9843 in. with loop CW, double-steel weave length: 600

52.70 CHF

Cable pulling grip Ø 20 - 25 mm/0,7874 - 0,9843 in. with loop CW, double-steel weave length: 600

52.70 CHFCable pulling grip (sock) with loop. Made of flexible, robust and CDP coated double steel mesh. The re-braided cable pulling grip (sock) end offers a higher standard of safety. The cable pulling grip (sock) series with loop is perfectly suited in combination with the RUNPOTEC pulling ropes and the cable pulling winch CW 800 E. RUNPOTEC recommends using the specially developed connecting swivel made of high-quality stainless steel for permanent tension. Highest quality materials with a long service life! Scope of supply: 1 x Cable pulling grip Ø 20 - 25 mm with loop CW
Cable pulling grip Ø 25 - 30 mm/0,9843 - 1,1811 in. with loop CW, double-steel weave length: 1000

Cable pulling grip Ø 25 - 30 mm/0,9843 - 1,1811 in. with loop CW, double-steel weave length: 1000

57.60 CHF

Cable pulling grip Ø 25 - 30 mm/0,9843 - 1,1811 in. with loop CW, double-steel weave length: 1000

57.60 CHFCable pulling grip (sock) with loop. Made of flexible, robust and CDP coated double steel mesh. The re-braided cable pulling grip (sock) end offers a higher standard of safety. The cable pulling grip (sock) series with loop is perfectly suited in combination with the RUNPOTEC pulling ropes and the cable pulling winch CW 800 E. RUNPOTEC recommends using the specially developed connecting swivel made of high-quality stainless steel for permanent tension. Highest quality materials with a long service life! Scope of supply: 1 x Cable pulling grip Ø 25 - 30 mm with loop CW
Cable pulling grip Ø 30 - 40 mm/1,1811 - 1,5748 in. with loop and thread RTG Ø 6 mm and 12 mm,

Cable pulling grip Ø 30 - 40 mm/1,1811 - 1,5748 in. with loop and thread RTG Ø 6 mm and 12 mm,

75.60 CHF

Cable pulling grip Ø 30 - 40 mm/1,1811 - 1,5748 in. with loop and thread RTG Ø 6 mm and 12 mm,

75.60 CHFCable pulling grip (sock) with loop and RUNPOTEC RTG Ø 12 mm and RTG 6 mm thread including swivel. Made of flexible stainless steel wire mesh. The built-in swivel allows the cable to turn in the pipe, thus preventing the thread from unscrewing. Can also be looped in. Highest quality materials with a long service life! Compatible with RUNPOTEC RTG Ø 12 mm and RTG Ø 6 mm thread. Preferably in combination with fiberglass rods. Information in combination with the CW 800 E capstan winch: RUNPOTEC recommends the use of cable pulling grip (sock) with loop Art.No. 20661 - 20670 in combination with the CW 800 E capstan winch or the pulling ropes in combination with the connecting swirl with swivel Art.No. 10176. Scope of supply: 1 x Cable pulling grip Ø 30 - 40 mm with loop and thread RTG Ø 6 mm and 12 mm, incl. swivel
Cable pulling grip Ø 30 - 40 mm/1,1811 - 1,5748 in. with loop CW, double-steel weave length: 1250

Cable pulling grip Ø 30 - 40 mm/1,1811 - 1,5748 in. with loop CW, double-steel weave length: 1250

65.50 CHF

Cable pulling grip Ø 30 - 40 mm/1,1811 - 1,5748 in. with loop CW, double-steel weave length: 1250

65.50 CHFCable pulling grip (sock) with loop. Made of flexible, robust and CDP coated double steel mesh. The re-braided cable pulling grip (sock) end offers a higher standard of safety. The cable pulling grip (sock) series with loop is perfectly suited in combination with the RUNPOTEC pulling ropes and the cable pulling winch CW 800 E. RUNPOTEC recommends using the specially developed connecting swivel made of high-quality stainless steel for permanent tension. Highest quality materials with a long service life! Scope of supply: 1 x Cable pulling grip Ø 30 - 40 mm with loop CW

<< < 1 2 3 ... > >>