RP5 (Runpo 5) avec compteur digital - 30 m + boucle de tirage avec crochet, capuchon - Lot de 4.

RP5 (Runpo 5) avec compteur digital - 30 m + boucle de tirage avec crochet, capuchon - Lot de 4.

245.50 CHFThe RP5 - RUNPOTEC Polyester Ø 5.5 mm is a cable pulling tool including a digital meter counter (for determining the length of pipes/cables or for creating cable lists). The triple-twisted special plastic tape Ø 5.5 mm has an even better thrust effect than the glass fibre rod Ø 3 mm and the frictional resistance is only half as great due to its point contact. The patented RG7 guide tip with twist compensation Ø 5.5 mm (pressed at the beginning and end of the tape) enables the tightest radii to be overcome (bending radius 15 mm). The RP5 RUNPOTEC polyester Ø 5.5 mm is stored in a robust storage box with an ergonomic carrying handle that is suitable for use on construction sites. This is equipped with the new reverse feed protection (stops only the RG7 guide tip), which prevents the cable pulling tape from slipping back unintentionally. The unit of measurement on the metre counter can be changed from metric (m) to imperial (ft). The total breaking load of an incredible 270 kg refers to the entire pulling system. Labour-intensive and time-consuming repair work is no longer necessary, as this cable pulling system is virtually unbreakable. The RP5 is available in lengths of 20 m and 30 m. The RP5 replacement tape 40 m cannot be stored in the box. Optimal application: for pipe inner diameters of 9 - 32 mm. + Cable pulling loop with protective cap and hook. Flexible loop made of stainless steel with a diameter of 1.5 mm. Easy attachment of cables to the loop. The protective cap allows cables with plugs to be pulled through pipes or other situations. The hook allows the cable pulling loops to be attached to all products with RG ¬RUNPOGLEITER (guide tip) (RP5, RP1, etc.). Also ideal for attaching or pulling several cables together. Optimal application: From 14 mm inner diameter and non-guided cables Scope of supply: 1 x RP5 cable pulling tool Ø 5,5 mm with digital meter counter in a plastic box, length: 30 m, including 2 x RG7 RUNPOGLEITER with swivel (pressed on both sides), Cable pulling loop with hook set of 4: 1 x protective cap outer Ø 14 mm, 1 x protective cap outer Ø 17 mm, 1 x protective cap outer Ø 23 mm, 1 x protective cap outer Ø 30 mm
RP5 (Runpo 5) with digital meter counter - 30 m + XB 300 Cable Roller + Multifunctional Mandrel +

RP5 (Runpo 5) with digital meter counter - 30 m + XB 300 Cable Roller + Multifunctional Mandrel +

395.90 CHFInstead of480.30 CHFThe multifunction mandrel has been specially developed for XB 300, XB 500 and XB 500 T cable rolling systems. Loose cable bundles can also be rolled by attaching them to the stainless-steel center mandrel and then folding out the 4 side brackets. The telescopic center mandrel measures 72 mm in diameter. It is therefore also ideal for rolling a thinner cable bundle with a small inner diameter or individual wires. The normal height of the multifunction mandrel is 196 mm, which can be extended up to max. 294 mm via the telescopic mechanism. This means high cable bundles or corresponding tube bundles can also be rolled. When the 4 side brackets are unfolded, there is a total contact surface of 430 mm in diameter. Ideally, this should correspond to the respective cable or tube bundle. A designated opening allows the unit to be combined with the RUNPOSTICKS. Optimum area of application: : XB 300: Rolling of (damaged) drums up to 300 kg as well as loose cable bundles or individual wires up to a max. height of 294 mm and a max. diameter of 430 mm, RP5: for pipe dimension 16 mm - 40 mm Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x XB 300, 1 x Multifunction mandrel, 1 x RP5 with digital meter counter - 30 m, 1 x RUNPOTEC system case
Cable lubricant set GEL 24 x 1000 g (24 units A30064)

Cable lubricant set GEL 24 x 1000 g (24 units A30064)

108.90 CHFInstead of127.20 CHF
Operational area: RUNPOTEC cable lubricant GEL reduces the frictional resistance enormously, thus making it easier to pull cables and wires into electrical installation pipes and protecting them from cable damage. Application: Apply RUNPOTEC cable lubricant GEL to the cable or on the inside of the pipe. Also highly effective for the pushing in with cable pushing systems. Product features: Non-flammable, reduces frictional resistance, temperature resistant up to 85 °C, improved sliding effect, silicone-free, water-soluble, non-corrosive, no sticking, skin-friendly, biodegradable.Dissolves without residue. Caution: Seal after use, store in a cool and dry place. Contact with live parts must be avoided. Risk of short circuit! EUH208: Contains 2 methyl-2H-isothiazole-3-one. Can cause allergic reactions. Staining possible on sensitive surfaces. For instructions see safety data sheet! 
Cable lubricant set GEL 24 x 1000 g (24 units A30064)

Cable lubricant set GEL 24 x 1000 g (24 units A30064)

97.90 CHFInstead of111.60 CHF
Operational area: RUNPOTEC cable lubricant GEL reduces the frictional resistance enormously, thus making it easier to pull cables and wires into electrical installation pipes and protecting them from cable damage. Application: Apply RUNPOTEC cable lubricant GEL to the cable or on the inside of the pipe. Also highly effective for the pushing in with cable pushing systems. Product features: Non-flammable, reduces frictional resistance, temperature resistant up to 85 °C, improved sliding effect, silicone-free, water-soluble, non-corrosive, no sticking, skin-friendly, biodegradable.Dissolves without residue. Caution: Seal after use, store in a cool and dry place. Contact with live parts must be avoided. Risk of short circuit! EUH208: Contains 2 methyl-2H-isothiazole-3-one. Can cause allergic reactions. Staining possible on sensitive surfaces. For instructions see safety data sheet! 
Cable lubricant set GEL 24 x 1000 g (24 units A30064)

Cable lubricant set GEL 24 x 1000 g (24 units A30064)

235.90 CHFInstead of285.60 CHF
Operational area: RUNPOTEC cable lubricant GEL reduces the frictional resistance enormously, thus making it easier to pull cables and wires into electrical installation pipes and protecting them from cable damage. Application: Apply RUNPOTEC cable lubricant GEL to the cable or on the inside of the pipe. Also highly effective for the pushing in with cable pushing systems. Product features: Non-flammable, reduces frictional resistance, temperature resistant up to 85 °C, improved sliding effect, silicone-free, water-soluble, non-corrosive, no sticking, skin-friendly, biodegradable.Dissolves without residue. Caution: Seal after use, store in a cool and dry place. Contact with live parts must be avoided. Risk of short circuit! EUH208: Contains 2 methyl-2H-isothiazole-3-one. Can cause allergic reactions. Staining possible on sensitive surfaces. For instructions see safety data sheet! 
Cable lubricant set GEL 8 x 1000 g (8 units A30064)

Cable lubricant set GEL 8 x 1000 g (8 units A30064)

80.90 CHFInstead of95.20 CHF
Operational area: RUNPOTEC cable lubricant GEL reduces the frictional resistance enormously, thus making it easier to pull cables and wires into electrical installation pipes and protecting them from cable damage. Application: Apply RUNPOTEC cable lubricant GEL to the cable or on the inside of the pipe. Also highly effective for the pushing in with cable pushing systems. Product features: Non-flammable, reduces frictional resistance, temperature resistant up to 85 °C, improved sliding effect, silicone-free, water-soluble, non-corrosive, no sticking, skin-friendly, biodegradable.Dissolves without residue. Caution: Seal after use, store in a cool and dry place. Contact with live parts must be avoided. Risk of short circuit! EUH208: Contains 2 methyl-2H-isothiazole-3-one. Can cause allergic reactions. Staining possible on sensitive surfaces. For instructions see safety data sheet! 
Capstan winch set with pull rope, connecting swivel and 3 cable pulling sockets

Capstan winch set with pull rope, connecting swivel and 3 cable pulling sockets

3'805.05 CHFInstead of3'999.00 CHF
Set consisting of: CW 800 E - capstan winch, incl. trolley mounting rail and 3 m belt, motor connection: 230 V / 50 Hz, selectable pulling force 800 kg / 400 kg or pulling speed 4 / 8 m/min. + pulling rope Ø 10 mm, length 200 m, incl. reel Ø 770 mm with locking brake and transport wheels, polyester rope, total breaking load 1640 kg + connecting swivel with twist compensation, stainless steel (corrosion-free), max. pulling force Ø 30 mm, max. pulling speed 4 / 8 m/min. Reel Ø 770 mm with parking brake and transport wheels, polyester rope, total breaking load 1640 kg + Connecting swivel with twist compensation, stainless steel (corrosion-free), Ø 30 mm, max. tensile load 1500 kg + 3 pcs. free cable pulling grips with loop CW, double steel braiding (1 x Ø 25 - 30 mm, 1 x Ø 30 - 40 mm, 1 x Ø 40 - 50 mm, length: 1000 - 1250 mm, total breaking load 2080 - 4078 kg)
CB 260 Cable Box - set of 4 (4 boxes) Cable dispenser - single wire dispenser

CB 260 Cable Box - set of 4 (4 boxes) Cable dispenser - single wire dispenser

390.00 CHFInstead of416.00 CHFThe CB 260 Cable Box is an innovative single-core unwinder (cable unwinder) that has been specially developed for the efficient management of cables and single-core wires. A perfect cable unwinding system that is ideal for all single-core laying work, control cabinet assembly. In addition to single-core wires, the CB 260 is also suitable for control, box and telephone cables as well as many other types of cables. It offers a professional and tidy solution for storing, changing and unwinding single-core wires or cables with a bundle diameter of max. 26 cm. Thanks to their modular design, the boxes can be easily connected, stacked and arranged, allowing flexible adaptation to different work environments. The quick roll change and user-friendly handling make the CB 260 Cable Box an indispensable tool for anyone who values ​​efficient and well-organized cable management. Functions of the CB260 Cable Box: Stackable and fixable: The boxes can be stacked and fixed to each other. They can be easily separated and reconnected both vertically and horizontally using the release buttons. Quick and easy changing: The rolls can be easily changed using the push button. The roll can be opened and closed quickly using a twist lock, which makes changing the cable bundle much easier. Ergonomic carrying handle: For comfortable and safe transport, even when fully loaded - max. 5kg per box. Outlet guide: A special outlet guide ensures that the cables can be unrolled evenly and without tangling. Non-slip stand: The box is equipped with rubberized feet that ensure a secure hold on different surfaces. Additional extensions: Transport trolley: The boxes can be connected with wheels to create a transport trolley. Different construction variants are possible here. Wall bracket CB260: The wall bracket rails enable floor-free stacking. A large-scale cable management shelf can also be created or fixed. These advantages make the CB 260 Cable Box an efficient and versatile system for professional assembly and cable management.
CB 260 Cable Box - set of 6 (6 boxes) Cable dispenser - single core dispenser

CB 260 Cable Box - set of 6 (6 boxes) Cable dispenser - single core dispenser

526.95 CHFInstead of624.00 CHFThe CB 260 Cable Box is an innovative single-core unwinder (cable unwinder) that has been specially developed for the efficient management of cables and single-core wires. A perfect cable unwinding system that is ideal for all single-core laying work, control cabinet assembly. In addition to single-core wires, the CB 260 is also suitable for control, box and telephone cables as well as many other types of cables. It offers a professional and tidy solution for storing, changing and unwinding single-core wires or cables with a bundle diameter of max. 26 cm. Thanks to their modular design, the boxes can be easily connected, stacked and arranged, allowing flexible adaptation to different work environments. The quick roll change and user-friendly handling make the CB 260 Cable Box an indispensable tool for anyone who values ​​efficient and well-organized cable management. Functions of the CB260 Cable Box: Stackable and fixable: The boxes can be stacked and fixed to each other. They can be easily separated and reconnected both vertically and horizontally using the release buttons. Quick and easy changing: The rolls can be easily changed using the push button. The roll can be opened and closed quickly using a twist lock, which makes changing the cable bundle much easier. Ergonomic carrying handle: For comfortable and safe transport, even when fully loaded - max. 5kg per box. Outlet guide: A special outlet guide ensures that the cables can be unrolled evenly and without tangling. Non-slip stand: The box is equipped with rubberized feet that ensure a secure hold on different surfaces. Additional extensions: Transport trolley: The boxes can be connected with wheels to create a transport trolley. Different construction variants are possible here. Wall bracket CB260: The wall bracket rails enable floor-free stacking. A large-scale cable management shelf can also be created or fixed. These advantages make the CB 260 Cable Box an efficient and versatile system for professional assembly and cable management.

<< < 1 2 3 > >>