RM35 + XB300 - Digital cable length measuring device - universal profi cable roller in

RM35 + XB300 - Digital cable length measuring device - universal profi cable roller in

399.00 CHFInstead of500.00 CHF

RM35 + XB300 - Digital cable length measuring device - universal profi cable roller in

399.00 CHFInstead of500.00 CHF
The RM 35 is a digital cable length measuring device which be used to precisely measure cables, single conductors, ropes, pipes or hoses with a diameter of Ø 2 mm to Ø 32 mm. It is splash-proof and dust-proof, extremely shock-resistant and thus ideally suited for the jobsite. The RM 35 has 2 totalling buttons which can be used to add up the measured values as you work. A countdown function is also included, which can be used to measure predetermined cable lengths. The RM 35 is equipped with a lithium ion battery that has an extremely long runtime (100 hrs. continuous operation without backlighting). The battery can be charge using the integrated USB-C charging socket. The RM35 can be easily connected to the X BOARD XB 300 or XB 500 cable unwinding system via the supplied belt and clip system. The belt length can be easily adjusted from 750 mm to 1200 mm. Calibration capable INFO: Should you require a calibrated RUNPOMETER RM35, please contact your sales partner or RUNPOTEC directly to clarify price and delivery time. The X BOARD XB 300 is a universal professional cable winder/unwinder for all small to medium cable reels (also for damaged cable drums). Loadable up to 300 kg. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x RUNPOMETER RM35, 1 x belt with clip system 1200 mm, 1 x anchor pad, 1 x mounting plate system case, 2 x guide jaws grey (Ø 12 mm / 18 mm), 2 x guide jaws red (Ø 6 mm / 24 mm), 1 x USB-C charging cable, 1 x mains plug, 1 x RUNPOTEC system case, 1 x X BOARD XB 300
RP5 (RUN - 30 m/98,43 ft. + RUNPOFIX set of 4 with hook - Profi cable pulling system + cable pulling

RP5 (RUN - 30 m/98,43 ft. + RUNPOFIX set of 4 with hook - Profi cable pulling system + cable pulling

189.90 CHF

RP5 (RUN - 30 m/98,43 ft. + RUNPOFIX set of 4 with hook - Profi cable pulling system + cable pulling

189.90 CHFRP5 (RUNPO 5) / 30m: Special reinforced polyester rod triple twisted Ø 5,3 mm in box, with pressed terminals-starting and ending flexible runpoglider with swivel for maximum bending and gliding behaviour. Recommended tube diameter 16-40 mm, bending radius 20 mm and tension loads of 270 kg. RUNPOFIX - Cable pulling loop with protective cap and hook. Flexible loop made from stainless steel Ø 1.5 mm. The cable can easily be attached to the loop. The protective cap protects the plug from damage and can be pulled through the pipe without hanging loose. The hook enables the RUNPOFIX cable pull-in loop to be fi xed to all the eyelets on the RUMPOGLEITER products. (RP5 (RUNPO 5), RUNPO 1) Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x RUNPO 5 in plastic box, Length: 30m, incl. 2 x RUNPOGLIDER with swivel (pressed on both sides), RUNPOFIX set of 4 with hook: 1 x protective cap outer Ø 14 mm, 1 x protectivce cap outer Ø 17 mm, 1 x protective cap outer Ø 23 mm, 1 x protective cap outer Ø 30 mm
RP5 (RUNPO 5) + XB 300 - MULTI-SET - Profi cable pulling system + univeral profi-cable roller +

RP5 (RUNPO 5) + XB 300 - MULTI-SET - Profi cable pulling system + univeral profi-cable roller +

345.00 CHFInstead of440.80 CHF

RP5 (RUNPO 5) + XB 300 - MULTI-SET - Profi cable pulling system + univeral profi-cable roller +

345.00 CHFInstead of440.80 CHFThe compact X BOARD XB 300 is a universal professional cable winder/unwinder for all small to medium cable reels. The XB 300 impresses with its small, light and flat design, but can still be loaded up to 300 kg. Especially suitable for damaged cable drums. Due to the removable mandrel, cable drums with different hole sizes can be used. The multifunction mandrel has been specially developed for the X BOARD XB 300 cable rolling system. Loose cable bundles can also be rolled by attaching them to the stainless steel centre mandrel of the XB 300 and then folding out the 4 side brackets. 6 rubberised feet ensure a non-slip and stable base. Optimal for protecting surfaces for already finished floor coverings. Optimum area of application: XB 300: rolling of (damaged) cable drums up to max. 300 kg and loose cable bundles or individual wires up to a max. height of 294 mm and a max. diameter of 430 mm - RUNPO 5: for pipe dimension 16 mm – 40 mm Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x X BOARD XB 300, 1 x multifunction mandrel, 1 x RP5 (RUNPO 5) - 30 m, 1 x RUNPOTEC system case
RUNPOCAM RC2 - 50 m/164,04 ft. + Profi-Set Fiberglass rod Ø 4,5 mm - 50 m/164,04 ft. -

RUNPOCAM RC2 - 50 m/164,04 ft. + Profi-Set Fiberglass rod Ø 4,5 mm - 50 m/164,04 ft. -

839.05 CHFInstead of1'037.00 CHF

RUNPOCAM RC2 - 50 m/164,04 ft. + Profi-Set Fiberglass rod Ø 4,5 mm - 50 m/164,04 ft. -

839.05 CHFInstead of1'037.00 CHF"RUNPOCAM RC2 multifunct camera with cable length 50 m with reel incl. monitor fixing. In W-BOXX system case – compatible with Sortimo®. Extra-large 3.5“ TFT LCD 16M Colour Display. Protection Rating IP 67. Continuous battery operation up to 6 hours. Evidence conservation/memory function: Photo, video and audio. Multifunction-inspection-camera with 6 integrated LED (camera probe IP rating IP67), enclosed in robust stainless steel head (Ø 13 mm) with RTG 6 mm inside connecting thread - (POWER REX, RUNPOSTICKS, RUNPO 1, fiberglass rod Ø 4.5 – 6 – 7.5 – 9 – 11 – 15 mm). Unroll possibility for the cable in combination with the RUNPOTEC XB 300. The RUNPOCAM RC is generally suitable for pipe inspectionen for long distances up to 50 m – but also for bigger pipe diameters, ventilation systems, drainage, wastewater piping, etc.). Minimum inner diameter oft he conduit Ø 14 mm. In combination with the RUNPOSTICKS outstanding for hollow-wall inspection, suspended ceilings (over high ceiling profi les) shaft and underfl oor channels, maintenance and equipment inspection. Profi-Set Fiberglass rod Ø 4,5 mm 10057: length 50 meter with RUNPOTEC RTG Ø 6 mm thread and new, double outlet system (automatic run-out brake and quick outlet), additional locking brake, extractable standing feet and stowage compartment for accessories. Fiberglass rod breaking load 1300 kg, total tension load 220 kg. Application area RUNPOCAM RC 2 in combination with Profi Set 4,5 mm: recommended tube diameter 30-80 mm, bending radius 120 mm
RUNPOSTICKS Comfort Set 19-parts + RUNPOFIX 4 set of 4 with thread, cable pulling aid for not guided

RUNPOSTICKS Comfort Set 19-parts + RUNPOFIX 4 set of 4 with thread, cable pulling aid for not guided

198.00 CHF

RUNPOSTICKS Comfort Set 19-parts + RUNPOFIX 4 set of 4 with thread, cable pulling aid for not guided

198.00 CHFRUNPOSTICKS Comfort Set: the new basalt technology allows extreme bending radii, however, the rods retain high dimensional stability. All connections have a RUNPOTEC RTG Ø 6 mm thread, have no butt edges or thread transitions. Objects weighing up to 2.5 kg can be held with the magnet. In combination with the magnet, the ball chain enables targeted locating or guiding to wall openings. In addition, the Comfort package includes the special sliding hook and can easily overcome obstacles up to 8 cm high thanks to the tilt function. The shockproof LED lamp also included has a very high luminosity and extremely long illumination time due to its AAA Duracell battery. All accessories can be perfectly stored in the practical storage bag with carrying strap. RUNPOFIX - cable pulling loop with protective cap and RUNPOTEC RTG Ø 6 mm thread. The built-in swivel allows the cable to rotate in the pipe. Easy attachment of cables to the loop. Connectors are protected by tensile stress on the cable. The protective cap allows cables with plugs to be pulled through pipes or in other situations while protecting the plug. Also ideally suited for fixing or pulling several cables together. Due to the RUNPOTEC RTG Ø 6 mm thread all RUNPOFIX cable pulling loops are compatible to all RUNPOTEC products with RTG Ø 6 mm thread. Optimal area of application: RUNPOSTICKS - suspended ceilings, cable ducts, hollow walls, retroactive cabling for non-routed cables, underfloor shafts, various bushings and much more. RUNPOFIX: from 14 mm inner diameter and non-routed cables. Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: RUNPOSTICKS comfort Set: 5 x RUNPOSTICKS red (hard) Ø 7.5 mm, 3 x RUNPOSTICKS black (medium) Ø 5.5 mm, 2 x RUNPOSTICKS yellow (soft) Ø 4.5 mm, 1 x RUNPOGLIDER, 1 x extra strong magnet, 1 x ball chain, 1 x eyelet with ring, 1 x fishing hook, 1 x connecting thread, 1 x storage bag, 1 x special sliding hook, 1 x shockproof LED lamp, RUNPOFIX set of 4: 1 x protective cap outer Ø 14 mm, 1 x protectivce cap outer Ø 17 mm, 1 x protective cap outer Ø 23 mm, 1 x protective cap outer Ø 30 mm
XB 300 - COMPLETE SET - universal profi-cable roller + multifunction mandrel in RUNPOTEC system

XB 300 - COMPLETE SET - universal profi-cable roller + multifunction mandrel in RUNPOTEC system

239.00 CHFInstead of271.30 CHF

XB 300 - COMPLETE SET - universal profi-cable roller + multifunction mandrel in RUNPOTEC system

239.00 CHFInstead of271.30 CHFThe compact X BOARD XB 300 is a universal professional cable winder/unwinder for all small to medium cable reels. The XB 300 impresses with its small, light and flat design, but can still be loaded up to 300 kg. Especially suitable for damaged cable drums. Due to the removable mandrel, cable drums with different hole sizes can be used. The multifunction mandrel has been specially developed for the X BOARD XB 300 cable rolling system. Loose cable bundles can also be rolled by attaching them to the stainless steel centre mandrel of the XB 300 and then folding out the 4 side brackets. 6 rubberised feet ensure a non-slip and stable base. Optimal for protecting surfaces for already finished floor coverings. Stowed in RUNPOTEC system case - Sortimo compatible Optimum area of application: XB 300: rolling of (damaged) cable drums up to max. 300 kg and loose cable bundles or individual wires up to a max. height of 294 mm and a max. diameter of 430 mm Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x X BOARD XB 300, 1 x multifunction mandrel, 1 x RUNPOTEC system case
XB 300 + multifunction mandrel SET - universal profi-cabel roller, Ø 300 mm/11,8110 in., loadable up

XB 300 + multifunction mandrel SET - universal profi-cabel roller, Ø 300 mm/11,8110 in., loadable up

189.00 CHFInstead of205.00 CHF

XB 300 + multifunction mandrel SET - universal profi-cabel roller, Ø 300 mm/11,8110 in., loadable up

189.00 CHFInstead of205.00 CHFThe compact X BOARD XB 300 is a universal professional cable winder/unwinder for all small to medium cable reels. The XB 300 impresses with its small, light and flat design, but can still be loaded up to 300 kg. Especially suitable for damaged cable drums. Due to the removable mandrel, cable drums with different hole sizes can be used. The multifunction mandrel has been specially developed for the X BOARD XB 300 cable rolling system. Loose cable bundles can also be rolled by attaching them to the stainless steel centre mandrel of the XB 300 and then folding out the 4 side brackets. 6 rubberised feet ensure a non-slip and stable base. Optimal for protecting surfaces for already finished floor coverings. Optimum area of application: XB 300: rolling of (damaged) cable drums up to max. 300 kg and loose cable bundles or individual wires up to a max. height of 294 mm and a max. diameter of 430 mm Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x X BOARD XB 300, 1 x multifunction mandrel

<< < 1 2 > >>