Cable guide roller with insertion tube DM48, aluminium heavy-duty rollers with stainless steel

Cable guide roller with insertion tube DM48, aluminium heavy-duty rollers with stainless steel

142.00 CHF

Cable guide roller with insertion tube DM48, aluminium heavy-duty rollers with stainless steel

142.00 CHFThe cable guide roller with DM48 insertion tube has been developed to guide cables around corners and edges with minimal resistance and particular care. It is inserted directly into the tube (internal diameter min. Ø 49 mm - max. Ø 60 mm) and ensures that the cables can be pulled in safely and without friction resistance. The guide roller can be quickly and reliably fixed in place with a screw via the integrated mounting openings. The lightweight but extremely robust design significantly reduces the effort required and enables speedy work. High-quality heavy-duty die-cast aluminium rollers with integrated stainless steel ball bearings and the stable, powder-coated steel frame ensure a long service life. The ergonomic aluminium carrying handle makes handling even easier. With a load capacity of 4500 kg, the cable guide roller is also ideal for demanding applications. Optimal area of application: Gentle and effortless pulling of cables over corners or edges. Scope of supply: 1 x Cable guide roller with insertion tube DM48
Cable guide roller with insertion tube DM60, aluminium heavy-duty rollers with stainless steel

Cable guide roller with insertion tube DM60, aluminium heavy-duty rollers with stainless steel

145.00 CHF

Cable guide roller with insertion tube DM60, aluminium heavy-duty rollers with stainless steel

145.00 CHFThe cable guide roller with DM60 insertion tube has been developed to guide cables around corners and edges with minimal resistance and particular care. It is inserted directly into the tube (internal diameter min. Ø 61 mm - max. Ø 76 mm) and ensures that the cables can be pulled in safely and without friction resistance. The guide roller can be quickly and reliably fixed in place with a screw via the integrated mounting openings. The lightweight but extremely robust design significantly reduces the effort required and enables speedy work. High-quality heavy-duty die-cast aluminium rollers with integrated stainless steel ball bearings and the stable, powder-coated steel frame ensure a long service life. The ergonomic aluminium carrying handle makes handling even easier. With a load capacity of 4500 kg, the cable guide roller is also ideal for demanding applications. Optimal area of application: Gentle and effortless pulling of cables over corners or edges. Scope of supply: 1 x Cable guide roller with insertion tube DM60
Cable guide roller with insertion tube DM76, aluminium heavy-duty rollers with stainless steel

Cable guide roller with insertion tube DM76, aluminium heavy-duty rollers with stainless steel

149.00 CHF

Cable guide roller with insertion tube DM76, aluminium heavy-duty rollers with stainless steel

149.00 CHFThe cable guide roller with DM76 insertion tube has been developed to guide cables around corners and edges with minimal resistance and particular care. It is inserted directly into the tube (internal diameter min. Ø 77 mm - max. Ø 89 mm) and ensures that the cables can be pulled in safely and without friction resistance. The guide roller can be quickly and reliably fixed in place with a screw via the integrated mounting openings. The lightweight but extremely robust design significantly reduces the effort required and enables speedy work. High-quality heavy-duty die-cast aluminium rollers with integrated stainless steel ball bearings and the stable, powder-coated steel frame ensure a long service life. The ergonomic aluminium carrying handle makes handling even easier. With a load capacity of 4500 kg, the cable guide roller is also ideal for demanding applications. Optimal area of application: Gentle and effortless pulling of cables over corners or edges. Scope of supply: 1 x Cable guide roller with insertion tube DM76
Cable guide roller with insertion tube DM89, aluminium heavy-duty rollers with stainless steel

Cable guide roller with insertion tube DM89, aluminium heavy-duty rollers with stainless steel

153.00 CHF

Cable guide roller with insertion tube DM89, aluminium heavy-duty rollers with stainless steel

153.00 CHFThe cable guide roller with DM76 insertion tube has been developed to guide cables around corners and edges with minimal resistance and particular care. It is inserted directly into the tube (internal diameter min. Ø 90 mm - max. Ø 105 mm) and ensures that the cables can be pulled in safely and without friction resistance. The guide roller can be quickly and reliably fixed in place with a screw via the integrated mounting openings. The lightweight but extremely robust design significantly reduces the effort required and enables speedy work. High-quality heavy-duty die-cast aluminium rollers with integrated stainless steel ball bearings and the stable, powder-coated steel frame ensure a long service life. The ergonomic aluminium carrying handle makes handling even easier. With a load capacity of 4500 kg, the cable guide roller is also ideal for demanding applications. Optimal area of application: Gentle and effortless pulling of cables over corners or edges. Scope of supply: 1 x Cable guide roller with insertion tube DM89
Cable lubricant foam, 400 ml, can with fold-out special attachment (spray over a large area and

Cable lubricant foam, 400 ml, can with fold-out special attachment (spray over a large area and

9.30 CHF

Cable lubricant foam, 400 ml, can with fold-out special attachment (spray over a large area and

9.30 CHFOperational area: RUNPOTEC cable lubricant FOAM, based on silicone, reduces the frictional resistance by up to 40% and thus facilitates the task of pulling cables and wires into electrical installation ducts. Application: Spray RUNPOTEC cable lubricant FOAM on the cable or in the cable shaft, the contained lubricants distributes itself evenly and thus facilitates immediate cable pulling. Thanks to the special applicator you can spray large areas or precisely and metered with the fold-up spray tube. Shake before use! Product features: Non-flammable, excellent sliding and lubricating properties, no sticking, no drying out, water soluble, VOC-free. Retains its lubricating and non-stick effect for many years. Non-drip, and thus perfect for clean overhead work. Caution: H229 container is under pressure, may explode when heated. Keep away from heat, hot surfaces, sparks, flames and other ignition sources. Smoking prohibited. Do not force open or burn, even after use. Protect from direct sunlight. Do not expose to temperatures above 50  C/122  F. Keep out of the reach of children. Staining possible on sensitive surfaces. For instructions see safety data sheet! Scope of supply: 1 x Cable lubricant foam 400 ml
Cable lubricant spray, 400 ml, can with fold-out special attachment (spray over a large area and

Cable lubricant spray, 400 ml, can with fold-out special attachment (spray over a large area and

10.60 CHF

Cable lubricant spray, 400 ml, can with fold-out special attachment (spray over a large area and

10.60 CHFOperational area: RUNPOTEC cable lubricant spray, based on silicone, reduces the frictional resistance by up to 40% and thus facilitates the process of pulling cables and wires into electrical installation ducts. Application: Spray RUNPOTEC cable lubricant spray on the cable or the inside of the cable duct. The lubricants contained in the spray are distributed evenly and thus facilitate immediate pulling-in of the cables. Thanks to the special applicator you can spray large areas or precisely and metered with the fold-up spray tube. Shake before use! Product features: Non-flammable, excellent sliding and lubricating effect, no sticking, no drying out, colourless, odourless. Retains its lubricating and non-stick effect for many years. Stains can be removed with conventional cleaning agents. Caution: H229 container is under pressure, may explode when heated. Keep away from heat, hot surfaces, sparks, flames and other ignition sources. Smoking prohibited. Do not force open or burn, even after use. Protect from direct sunlight. Do not expose to temperatures above 50  C/122  F. Keep out of the reach of children. Staining possible on sensitive surfaces. For instructions see safety data sheet! Scope of supply: 1 x Cable lubricant spray 400 ml
Cable pulley 90 degree 3R, aluminum heavy duty rollers with stainless steel ball bearing, steel

Cable pulley 90 degree 3R, aluminum heavy duty rollers with stainless steel ball bearing, steel

298.00 CHF

Cable pulley 90 degree 3R, aluminum heavy duty rollers with stainless steel ball bearing, steel

298.00 CHFThe cable guide roller - 90 degrees 3R is ideally suited for use on various edges to pull cables gently around corners with the least possible resistance. It can be secured in place with a belt or screws via the assembly openings. The lightweight and highly robust design reduces the effort required with optimum success. The high-quality, heavy-duty die-cast aluminium rollers with integrated stainless steel ball bearings and the sturdy powder-coated steel frame guarantee a long service life. Ergonomic aluminium handle - Load capacity 2500 kg Optimum area of application: to pull cables gently and effortlessly around corners or edges Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x Cable guide roller - 90 degrees 3R
Cable pulling grip Ø 10 - 15 mm/0,3937 - 0,5906 in. with loop CW, double-steel weave length: 600

Cable pulling grip Ø 10 - 15 mm/0,3937 - 0,5906 in. with loop CW, double-steel weave length: 600

49.20 CHF

Cable pulling grip Ø 10 - 15 mm/0,3937 - 0,5906 in. with loop CW, double-steel weave length: 600

49.20 CHFCable pulling grip (sock) with loop. Made of flexible, robust and CDP coated double steel mesh. The re-braided cable pulling grip (sock) end offers a higher standard of safety. The cable pulling grip (sock) series with loop is perfectly suited in combination with the RUNPOTEC pulling ropes and the cable pulling winch CW 800 E. RUNPOTEC recommends using the specially developed connecting swivel made of high-quality stainless steel for permanent tension. Highest quality materials with a long service life! Scope of supply: 1 x Cable pulling grip Ø 10 - 15 mm with loop CW
Cable pulling grip Ø 15 - 19 mm/ 0,5906 - 0,7480 in. with loop and thread RTG Ø 6 mm, stainless

Cable pulling grip Ø 15 - 19 mm/ 0,5906 - 0,7480 in. with loop and thread RTG Ø 6 mm, stainless

51.20 CHF

Cable pulling grip Ø 15 - 19 mm/ 0,5906 - 0,7480 in. with loop and thread RTG Ø 6 mm, stainless

51.20 CHFCable pulling grip (sock) with loop and RUNPOTEC RTG Ø 6 mm thread including swivel. Made of flexible stainless steel wire mesh. The built-in swivel allows the cable to turn in the pipe, thus preventing the thread from unscrewing. Could also be looped in. Highest quality materials with a long service life! Compatible with POWER REX, RUNPOSTICKS and fiberglass rods Ø 4.5 / 6 / 7.5 / 9 and 11 mm. Scope of supply: 1 x Cable pulling grip Ø 15 - 19 mm with loop and thread RTG Ø 6 mm, incl. swivel

<< < ... 2 3 4 ... > >>