The RUNPOLIFTER 4500 is a foldable cable drum lifter that is capable of lifting drums with a maximum diameter of 1600 mm and a maximum weight of 4500 kg. Its lightweight construction (22 kg per lifting support) means it can be easily transported, yet it still maintains excellent standing properties on a wide variety of floor coverings. The two lifting supports are equipped with a 2-stage gearbox. The fast gear is used for the idle stroke and the working gear is used for the load stroke. Switching between the two gears can be controlled by pulling out the crank. When using the RUNPOLIFTER 4500, it is not necessary to pin the raised load because the gearbox is equipped with a self-locking spindle. The included drum shaft features two plain bearings that enable the respective drum to be rolled comfortably without any trouble. The 1150 mm drum shaft is included. The following lengths are also available: 1350 mm or 1600 mm. The two included centring cones each have a quick-release fastener that enable the drum to be fixed quickly and centrally in place. Drums with a max. inner diameter of Ø 110 mm can be secured here. Optimum area of application: for lifting and then rolling cable drums with a diameter of up to 1600 mm, a wide of 800 mm and a max. weight of 4500 kg Application video: a short, very informative application video can be viewed by scanning the QR code or on www.RUNPOTEC.com. Scope of supply: 1 x RUNPOLIFTER 4500 (1 x support right, 1 x support left), 1 x drum shaft 1150 mm, 2 x centring cones with quick release fastener
1 x RUNPOLIFTER 4500 (1 x support right, 1 x support left), 1 x drum shaft 1150 mm / 1350 mm / 1600 mm (length according to selection above), 2 x centring cones with quick-release fastener
